Tamaño de los Frets ...

Item Number	Width X Height	Description	Used By
6230	.080" X .043"	This is the smallest fret wire.	Vintage Fender necks.
6130	.106" X .036"	Often referred to as "Medium Jumbo".	Many Gibson necks.
6150	.103" X .046"	A true "Jumbo". It is about the same width as the 6130 but a bit taller.	Modern Fender American necks.
6105	.096" X .047"	Narrow and tall.	Our most popular choice!
6100	.112" X .055"	Huge! This is big stuff for the almost scalloped feel.	Common on Ibanez neck

Yo tengo en mi black Strat la Vintage Fender 6230.

Reds

Tips para ajustar una Stratocaster: tremolo

StratTips

¿Cómo ajustar el Truss Rod en una Fender stratocaster?

TRUSS ROD
There are two different styles of truss rod found on Fender instruments—"standard" and "bi-flex" truss rods.

Most Fender guitars and basses are equipped with a standard truss rod (of which there are in turn two types: one that adjusts at the neck heel and one that adjusts at the headstock; both operate on the same principle). The standard truss rod can counteract concave curvature in a neck that has too much relief, for example, by generating a force in the neck opposite to that caused by excessive string tension.

Fender also uses a unique bi-flex truss rod system on some instruments. Unlike standard truss rods, which can only correct a neck that is too concave (under-bowed), the bi-flex truss rod can compensate concave or convex (over-bowed) curvature by generating a correcting force in either direction as needed.

First, check your tuning. Affix a capo at the first fret and depress the sixth string at the last fret. With a feeler gauge, check the gap between the bottom of the string and the top of the 8th fret—see the spec chart below for the proper gap.

Adjustment at headstock (allen wrench): Sight down the edge of the fingerboard from behind the headstock, looking toward the body of the instrument. If the neck is too concave (action too high), turn the truss rod nut clockwise to remove excess relief. If the neck is too convex (strings too close to the fingerboard), turn the truss rod nut counter-clockwise to allow the string tension to pull more relief into the neck. Check your tuning, then re-check the gap with the feeler gauge and re-adjust as needed.

Adjustment at neck joint (phillips screwdriver): Sight down the edge of the fingerboard from behind the body, looking up toward the headstock of the instrument. If the neck is too concave (action too high), turn the truss rod nut clockwise to remove excess relief. If the neck is too convex (strings too close to the fingerboard), turn the truss rod nut counter-clockwise to allow the string tension to pull more relief into the neck. Check your tuning, then re-check the gap with the feeler gauge and re-adjust as needed.

Note: In either case, if you meet excessive resistance when adjusting the truss rod, if your instrument needs constant adjustment, if adjusting the truss rod has no effect on the neck, or if you're simply not comfortable making this type of adjustment yourself, take your instrument to your local Fender Authorized Dealer.

Neck Radius
7.25" - .012" (0.3 mm)
9.5" to 12" - .010" (0.25 mm)
15" to 17" - .008" (0.2 mm)

Características de cápsulas Fender ...

Fender Strat Custom 54
Imán: Alnico V
Carácter: Vintage
Output: bajo
Conexiones: 2 cables, material recubierto de cera
Impedancia Mástil: 5,9 kohmios
Impedancia Medio: 5,9 kohmios
Impedancia puente: 6,5 kohmios

Fender 57/62 vintage
Imán: Alnico V
Carácter: Vintage
Output: bajo
Conexiones: 2 cables, material recubierto de cera
Impedancia: 5,6 kohmios

Fender Strat Fat 50's
Imán: Alnico V
Carácter: Vintage
Output: Medium
Conexiones: 2 cables, material recubierto de cera
Impedancia Mástil: 6,0 kohmios
Impedancia Medio: 6,3 kohmios
Impedancia puente: 6,2 kohmios

Las nuevas guitarras de Fender ... Gilmour

http://www.fender.com/customshop/instruments/search.php?partno=0150068806

http://www.fender.com/customshop/instruments/search.php?partno=0150069806

NO LO CUEDES CREER!!!!!!!

El 22 de septiembre Fender Custom Shop comienza a comercializar la Fender Stratocaster Negra de David Gilmour.

http://blog.davidgilmour.com/2008/07/the-dg-strat.html

Detalles de la "Black Strat"

http://www.davidgilmour.com/news_photos/blackstratfans.htm

Mark Knopfler tiene un tono increible tambien ...

encontré este link.
están varios de sus discos, y aparentemente los acordes están buenos.
disfruten

http://www.knopfler.net/tcsa/chords/

una de mis canciones favoritas:
http://www.knopfler.net/tcsa/chords/dire_straits/6.html

Mis cápsulas ... Custom Shop Fat '50s

Do you want the sound of a '50s Strat®, but with a little bit more attitude?
Check out the Custom Shop Fat '50s. These calibrated pickups are constructed with hand beveled, staggered, Alnico 5 magnets and Formvar wire on the coils.
The Fat '50s deliver enhanced bass response without the harsh mid-range. The middle pickup is reverse wound/reverse polarity for hum canceling in positions 2 & 4.
The blues never sounded so sweet. OEM on Custom Shop Showmaster Series Stratocasters®. Available in white only, sold as set of 3 or as each.


Bridge Pickup
DC Resistance: 6.2K
Inductance: 2.8Henries

Middle Pickup
DC Resistance: 6.3K
Inductance: 2.75Henries

Neck Pickup
DC Resistance: 6.0K
Inductance: 2.4Henries

http://www.fender.com/products//search.php?partno=0992111000

una guitarra para mi familia ..

a mi me gusta Gilmour,
a mi me gusta fender ...

y a mi hija le fascina Hello Kitty ...



PERFECTO!

Más del Purple Tremolosaurus ...

adjunto links con sonidos del tremolosaurus, ademas de un sonido de referencia limpio.
sin reverb o delay, solo compresor en protools.

referencia guitarra limpia
http://www.filerom.com/es/download.php?id=6ABA9E011

tremolo ref
http://www.filerom.com/es/download.php?id=C8BF24091

acordes con tremolo
http://www.filerom.com/es/download.php?id=2F95E6691

Rz